RULE DEPTH GAGE, 0-6", 32nds/ 64ths 237
Item Code: 0681.51080
Manufacturer Ref 237
- Gage consists of a nicely finished, hardened steel head and an accurate, machine divided, tempered steel rule
- Gage can be smoothly adjusted to the required measurement and then locked into position by a knurled nut
- Base is cut out on one side, adjacent to the rule, permitting easier readings and more accurate measurements
- 6" hook rule also available, permitting easier readings from the edge of a workplace to the edges of the slots, and shoulders
- WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov
- Rules are either 610N (6 inch) or 635N (150mm) models
Description
RULE DEPTH GAGE, 0-6", 32nds/ 64ths 237
Item Code: 0681.51080
Manufacturer Ref 237
- Gage consists of a nicely finished, hardened steel head and an accurate, machine divided, tempered steel rule
- Gage can be smoothly adjusted to the required measurement and then locked into position by a knurled nut
- Base is cut out on one side, adjacent to the rule, permitting easier readings and more accurate measurements
- 6" hook rule also available, permitting easier readings from the edge of a workplace to the edges of the slots, and shoulders
- WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer, and birth defects or other reproductive harm. For more information go to: www.P65Warnings.ca.gov
- Rules are either 610N (6 inch) or 635N (150mm) models